Dream led IP66 surface mounted 16W 600mm incl. driver
79,30
Description
An extremely good waterproof fixture that makes the installer’s life easier. The best choice for a waterproof fixture in demanding conditions.
The high-quality LED chips are combined with a Philips Xitanium driver with a lifespan of over 100,000 hours! A super sustainable investment, in material and in energy consumption. By using very high-end components, it also means that you receive an unprecedented long warranty of no less than 7 years.
In developing this waterproof fixture, we looked through the eyes of the installer: quick and easy installation, even under difficult conditions. For example, the fixture comes standard with conduit wiring 5×2.5mm2 with connectors on both sides with plug-in terminals, so you can easily and quickly connect the power cable. Thereby, a swivel is already mounted on one side. On the other side is a swivel blind plug that can be replaced in seconds with the supplied second swivel.
The hood of the fixture can be opened and closed by hand by means of the stainless steel locking clips (RVS304 high corrosion resistance) are ideally suited for applications in aggressive environments and lockable if needed in public areas. These are made of high-quality stainless steel304 and lockable if needed in public areas. When fully installed, the luminaire is waterproof IP66 and has an impact resistance of IK10.
These Dream waterproof fixtures are suitable for temperatures between -25 to 35 degrees.
The fixture features a PG13.5 gland, it is suitable for a cable diameter up to 12mm.
Specifications
| Brand | Interlight |
|---|---|
| Product type | Waterproof |
| Suitable for wall mounting | Yes |
| GTIN | 08719214379469 |
| Suitable for wall mounting | Yes |
| Suitable for pendulum suspension | Yes |
| Suitable for ceiling mounting | Yes |
| Suitable for flush mounting | No |
| Suitable for surface mounting | Yes |
| Suitable for light line configuration | Yes |
| Suitable for clamp mounting | No |
| With mounting material | Yes |
| Suitable for monitor workplace according to EN 12464-1 | No |
| Suitable for number of light sources | 1 |
| Lamp type | LED interchangeable |
| With light source | Yes |
| Lampholder | Other |
| Housing material | Plastic |
| Surface protection housing | Plasticized |
| Housing color | Gray |
| Voltage type | AC |
| Material cover | Plastic opal |
| Nom. voltage | 230 V |
| Grid version | No |
| Nom. current | 200 – 350 mA |
| Ballast | LED control current-controlled |
| Driver included | Yes |
| Interchangeable ballasts | Yes |
| Dimmable | No |
| Not dimmable | Yes |
| Light distributor | Diffuser lens/optics/panel |
| Light distribution | Symmetrical |
| Beam angle | >80° – Extremely wide beam |
| Light outlet | Direct |
| Energy efficiency class of the built-in lamp | Other |
| Nom. life L70/B50 at 25 °C | 180000 h |
| Lumen maintenance at average lifetime of 50,000 hours at 25 °C environment (tq) | 90 % |
| Failure at average service life of 50,000 hours at 25 °C environment (tq) | 10 % |
| Protection degree back (IP). | Other |
| Degree of protection front (IP) | IP66 |
| Degree of protection (IP) | IP66 |
| Maximum number of fixtures per circuit breaker C10 (MCB) | 45 |
| Max. number of fixtures per line protection switch B16 | 72 |
| Max. number of fixtures per line protection switch C16 | 72 |
| Impact resistance | IK10 |
| Protection class according to IEC 61140 | I |
| Emergency power supply system | No |
| Nom. ambient temperature according to IEC62722-2-1 | -25 – 35 °C |
| Suitable for emergency lighting | Yes |
| With presence detector | No |
| With motion sensor | No |
| Specific luminous flux luminaire | 150 lm/W |
| Effective luminous flux according to IEC 62722-2-1 | 2400 lm |
| With light sensor | No |
| Cover fixture with thermal insulation material possible | No |
| With air slots | No |
| Light color according to EN 12464-1 | Neutral white 3300 – 5300 K |
| Suitable for lamp power | 11 – 18 W |
| Specific luminous flux luminaire | 150 – 155.6 lm/W |
| Max system power | 18 W |
| Effective luminous flux according to IEC 62722-2-1 | 1650 – 2800 lm |
| Light color | White |
| Color temperature | 4000 K |
| Flickering value Pst LM | 0.9 |
| Color rendering index | 80-89 |
| Power factor | 0.97 |
| Strobe effect value SVM | 0.35 |
| Width | 116 mm |
| Height/depth | 80 mm |
| Length | 600 mm |
| Type of wiring | Incl. through-wiring |
| Number of poles | 5 |
| Geleiderdoorsnede | 1.5 |
| Totale harmonische vervorming (THD) | 19 % |
| Connection method | Plug clamp |
| Connectable conductor cross section | 0.75 – 1.5 mm² |
| UGR | 24 |
| Light color adjustable | No |
| Luminous flux adjustable | Stands |
| Beam angle adjustable | No |
