Driver led dip switch 650 to 1,000mA not dimmable
27,25
Description
This non-dimming constant current driver is suitable for LED modules, with an input voltage of 220-240Vac and output of 650 to 1000mA. Through the 3 dip switches, the constant output current can be adjusted. The push-fit terminals help to reduce installation time and feature mechanical strain relief.
The IL-X3D40 has a flicker rate lower than 3% and is ENEC certified.
– Easy and quick connection with push-fit terminals and clip-on end cap for strain relief
– Large wiring space
– Loop in and loop out function, max.2.5mm2 cross-sectional area L, L, N, N stranded wire or solid wire
– No need to open the transparent end cap for inspection of loose wiring.
– Connect a maximum of 65 to one circuit breaker.
Specifications
| Brand | Interlight |
|---|---|
| Product type | On/Off |
| Model | Dynamic |
| GTIN | 08719214378288 |
| Suitable for outdoor use | No |
| Dimmable | No |
| Not dimmable | Yes |
| Housing | Plastic housing |
| Suitable for constant current | Yes |
| Suitable for constant voltage | Yes |
| Output voltage | 24 – 40 V |
| Output Current | 650 – 1000 mA |
| Suitable for direct voltage (primary side) | No |
| Output power | 26 – 38 W |
| Power Consumption | 38 W |
| Frequency input voltage | 50 – 60 Hz |
| Efficiency | 86 % |
| Emergency power supply system | No |
| Max. number of fixtures per line protection switch B16 | 49 |
| Max. number of fixtures per line protection switch C16 | 53 |
| Degree of protection (IP) | IP20 |
| Protection class according to IEC 61140 | II |
| Operating device life | 50000 h |
| Length | 86 mm |
| Width | 52 mm |
| Height | 30 mm |
