Easyfit led downlight 15W Ø180mm 4,000K ex. driver
33,95
Description
INTERLight’s EasyFit downlights are easy to install and the design provides a comfortable and soothing lighting experience. The design creates a calm light image because the LED engine is located deep inside the fixture, making the glare factor low. Ideal (as a replacement downlight) for in meeting centers and general and traffic areas.
Comes without driver.
Choose an Easyfit driver or set the Dip Switch driver to max. 400 mA.
If you choose a driver other than the EasyFit (IL-EDD) or a DALI2 driver, keep in mind that you will need a coupling cord (IL-S20FF).
Want this size downlight but less light, without using a dimmer. Then choose one of the drivers of the smaller Easyfit downlights (IL-EDD3D or IL-EDD4D).
It is possible to have the connection cord mounted to the driver. Please contact us and ask about the possibilities.
Color: RAL9016
Specifications
| Brand | Interlight |
|---|---|
| Product type | Downlight |
| Suitable for surface mounting | No |
| GTIN | 08719214374181 |
| Suitable for flush mounting | Yes |
| Suitable for wall mounting | No |
| Suitable for wall mounting | No |
| Suitable for pendulum suspension | No |
| With presence detector | No |
| Suitable for ceiling mounting | Yes |
| Suitable for truss mounting | No |
| Suitable for pedestal/floor mounting | No |
| Suitable for power rail mounting | No |
| Suitable for clamp mounting | No |
| Suitable for low voltage cable system | No |
| Adjustability | Not adjustable |
| Led nom. current at constant current | 400 mA |
| With motion sensor | No |
| With light sensor | No |
| Nom. current | 350 mA |
| Lamp type | LED not interchangeable |
| With light source | Yes |
| Suitable for number of light sources | 1 |
| Lampholder | Other |
| Housing material | Plastic |
| Surface protection | Lacquered |
| Dimmable 1-10 V | Yes |
| Housing color | White |
| Dimmable Dali-2 | Yes |
| Material cover | Plastic matte/satinized |
| Surface brushed | No |
| Voltage type | AC |
| Ballast | LED control current-controlled |
| Driver included | No |
| Dimming dependent on driver | Yes |
| Dimmable | Yes |
| Interchangeable ballasts | Yes |
| Dimmable phase cut | Yes |
| Dimmable phase cut | Yes |
| Reflector | No |
| Light distributor | Diffuser lens/optics/panel |
| Light distribution | Symmetrical |
| Reflector color | White |
| Beam angle | >80° – Extremely wide beam |
| Light outlet | Direct |
| Energy efficiency class of the built-in lamp | A++, A+, A (LED) |
| Degree of protection (IP) | IP44 |
| Impact resistance | IK02 |
| Protection class according to IEC 61140 | II |
| Nom. ambient temperature according to IEC62722-2-1 | -10 – 40 °C |
| Suitable for lamp power | 15 W |
| Max system power | 15 W |
| Luminous flux | 1500 lm |
| Effective luminous flux according to IEC 62722-2-1 | 1500 lm |
| Specific luminous flux lamp | 100 lm/W |
| Light color | White |
| Color temperature | 4000 K |
| Light color adjustable | No |
| Color rendering index | 90-100 |
| Effective luminous flux according to IEC 62722-2-1 | 1500 lm |
| Luminous flux adjustable | No |
| Specific luminous flux luminaire | 100 lm/W |
| Power factor | 0.9 |
| Installation diameter | 150 mm |
| Width | 180 mm |
| Height/depth | 50 mm |
| Outer diameter | 180 mm |
| Type of wiring | End |
| Number of poles | 2 |
| Connection method | Plug clamp |
| Specific luminous flux luminaire | 100 lm/W |
| Photobiological safety in accordance with EN 62471 | RG0 |
| Cover fixture with thermal insulation material possible | No |
| Color consistency (McAdam ellipse) | SDCM1 |
