Thinq Dream led IP66 surface mounted 51W 6,900lm 1,500mm incl. driver & sensor
288,75
Description
An extremely waterproof fixture that simplifies the installer’s work. The best choice for applications under demanding conditions.
In developing this waterproof fixture, we looked through the eyes of the installer: quick and easy installation, even in challenging situations. The fixture comes standard with 230V conduit wiring with connectors with plug-in terminals on both sides. This allows you to connect the power cable easily and quickly. On one side, moreover, a cable gland is already mounted; on the other side there is a rotatable blind plug, which can be replaced in seconds with the additional cable gland supplied.
The driver is adjustable via dip switches. On the 120 cm variant, the driver defaults to 700 mA, but is adjustable between 550 and 900 mA. On the 150 cm variant, the default setting is 1,000 mA, with a range of 900 to 1,250 mA.
You easily open and close the hood of the fixture by hand thanks to the stainless steel locking clips made of high-quality stainless steel304 (with high corrosion resistance). These are ideal for use in aggressive environments and can be locked for added security in public areas. When fully installed, the fixture is dust- and waterproof (IP66) and has high impact resistance (IK10).
Dream waterproof fixtures are equipped with an integrated Thinq sensor. Via the accompanying app, you easily set the fixtures to your liking. Want to add smart internet functionality later? No problem – an internet connection is already integrated. Check out all the benefits on our comprehensive Thinq page.
Technical specifications:Operating temperature: -20 °C to +35 °C. Additional gland included. The fixture features a PG13.5 gland, it is suitable for a cable diameter up to 12mm.
Specifications
| Brand | Interlight |
|---|---|
| Product type | Waterproof |
| Suitable for wall mounting | Yes |
| GTIN | 08720195276883 |
| Suitable for wall mounting | Yes |
| Suitable for pendulum suspension | Yes |
| Suitable for ceiling mounting | Yes |
| Suitable for flush mounting | No |
| Suitable for surface mounting | Yes |
| Suitable for light line configuration | Yes |
| Suitable for clamp mounting | No |
| With mounting material | Yes |
| Suitable for monitor workplace according to EN 12464-1 | No |
| Lamp type | LED interchangeable |
| With light source | Yes |
| Suitable for number of light sources | 1 |
| Lampholder | Other |
| Housing material | Plastic |
| Surface protection housing | Plasticized |
| Housing color | Gray |
| Material cover | Plastic opal |
| Nom. voltage | 230 V |
| Grid version | Other |
| Voltage type | AC |
| Ballast | LED control current-controlled |
| Driver included | Yes |
| Interchangeable ballasts | Yes |
| Dimmable | Yes |
| Dimming programmable | Yes |
| Not dimmable | Yes |
| Light distributor | Diffuser lens/optics/panel |
| Light distribution | Symmetrical |
| Beam angle | >80° – Extremely wide beam |
| Color consistency (McAdam ellipse) | SDCM5 |
| Light outlet | Direct |
| Energy efficiency class of the light source according to EU regulations 2019/2015 | D |
| Protection degree back (IP). | Other |
| Degree of protection front (IP) | IP66 |
| Degree of protection (IP) | IP66 |
| Maximum number of fixtures per circuit breaker C10 (MCB) | 16 |
| Max. number of fixtures per line protection switch B16 | 23 |
| Max. number of fixtures per line protection switch C16 | 26 |
| Impact resistance | IK10 |
| Protection class according to IEC 61140 | II |
| Emergency power supply integrated | No |
| Emergency power supply system | No |
| Nom. ambient temperature according to IEC62722-2-1 | -20 – 45 °C |
| Suitable for emergency lighting | Yes |
| With presence detector | Yes |
| With motion sensor | Yes |
| Specific luminous flux luminaire | 120 lm/W |
| Effective luminous flux according to IEC 62722-2-1 | 6900 lm |
| Motion sensor/presence detector technology | Passive infrared |
| With light sensor | Yes |
| Cover fixture with thermal insulation material possible | No |
| With air slots | No |
| Glow wire test according to IEC 60695-2-11 | 650 °C – 30 s |
| Suitable for lamp power | 45.7 – 63.9 W |
| Specific luminous flux luminaire | 135.63 – 138.07 lm/W |
| Max system power | 64 W |
| Effective luminous flux according to IEC 62722-2-1 | 6310 – 8690 lm |
| Light color | White |
| Color temperature | 4000 K |
| Flickering value Pst LM | 0.1 |
| Color rendering index | 80-89 |
| Power factor | 0.9 |
| Strobe effect value SVM | 0.1 |
| Width | 116 mm |
| Height/depth | 80 mm |
| Length | 1500 mm |
| Type of wiring | Incl. through-wiring |
| Number of poles | 3 |
| Geleiderdoorsnede | 1.5 |
| Totale harmonische vervorming (THD) | 10 |
| Connection method | Plug clamp |
| Connectable conductor cross section | 0.75 – 1.5 mm² |
| Light color adjustable | No |
| Luminous flux adjustable | Stands |
| Beam angle adjustable | No |
| Meets min. EIA lifetime criterion L90 (at 50,000 hours at tq = 25°C) | Yes |
