Easyfit led downlight 8W Ø110mm 4,000K ex. driver
15,55
Description
INTERLight’s EasyFit downlights are easy to install and the design provides a comfortable and soothing lighting experience. The design creates a calm light image because the LED engine is located deep inside the fixture, making the glare factor low. Ideal (as a replacement downlight) for in meeting centers and general and traffic areas.
Comes without driver.
Choose an Easyfit driver or set the Dip Switch driver to max 180 mA.
If you choose a driver other than the EasyFit (IL-EDD) or a DALI2 driver, keep in mind that you will need a coupling cord (IL-S20FF).
It is possible to have the connection cord mounted to the driver. Please contact us and ask about the possibilities.
Color: RAL9016
Specifications
| Brand | Interlight |
|---|---|
| Product type | Downlight |
| Suitable for surface mounting | No |
| GTIN | 08719214374129 |
| Suitable for flush mounting | Yes |
| Suitable for wall mounting | No |
| Suitable for wall mounting | No |
| Suitable for pendulum suspension | No |
| Suitable for ceiling mounting | Yes |
| Suitable for truss mounting | No |
| Suitable for pedestal/floor mounting | No |
| Suitable for power rail mounting | No |
| Suitable for clamp mounting | No |
| With presence detector | No |
| Suitable for low voltage cable system | No |
| Adjustability | Not adjustable |
| With motion sensor | No |
| With light sensor | No |
| Lamp type | LED not interchangeable |
| With light source | Yes |
| Suitable for number of light sources | 1 |
| Lampholder | Other |
| Housing material | Plastic |
| Surface protection | Lacquered |
| Housing color | White |
| Material cover | Plastic matte/satinized |
| Led nom. current at constant current | 180 mA |
| Surface brushed | No |
| Voltage type | AC |
| Nom. current | 180 mA |
| Ballast | LED control current-controlled |
| Driver included | No |
| Dimming dependent on driver | Yes |
| Dimmable | Yes |
| Dimmable 1-10 V | Yes |
| Interchangeable ballasts | Yes |
| Dimmable Dali-2 | Yes |
| Dimmable phase cut | Yes |
| Dimmable phase cut | Yes |
| Reflector | No |
| Light distributor | Diffuser lens/optics/panel |
| Light distribution | Symmetrical |
| Beam angle | >80° – Extremely wide beam |
| Light outlet | Direct |
| Energy efficiency class of the built-in lamp | A++, A+, A (LED) |
| Degree of protection (IP) | IP44 |
| Impact resistance | IK02 |
| Protection class according to IEC 61140 | II |
| Nom. ambient temperature according to IEC62722-2-1 | -10 – 40 °C |
| Suitable for lamp power | 8 W |
| Luminous flux | 650 lm |
| Light color | White |
| Color temperature | 4000 K |
| Reflector color | White |
| Color rendering index | 90-100 |
| Power factor | 0.9 |
| Type of wiring | End |
| Number of poles | 2 |
| Connection method | Plug clamp |
| Photobiological safety in accordance with EN 62471 | RG0 |
| Cover fixture with thermal insulation material possible | No |
| Color consistency (McAdam ellipse) | SDCM3 |
| Max system power | 8 W |
| Specific luminous flux lamp | 82 lm/W |
| Effective luminous flux according to IEC 62722-2-1 | 650 lm |
| Light color adjustable | No |
| Effective luminous flux according to IEC 62722-2-1 | 700 lm |
| Luminous flux adjustable | No |
| Specific luminous flux luminaire | 87.5 lm/W |
| Installation diameter | 90 mm |
| Width | 110 mm |
| Height/depth | 36.5 mm |
| Outer diameter | 110 mm |
| Specific luminous flux luminaire | 82 lm/W |
